How to Get Here
If you’re using a navigator, we recommend entering our name — Arvutimuuseum — instead of the address.
By car, you can approach from either Kadaka Street or Paldiski Highway.
For those using public transport, you need to get to the Laki bus stop.
From the Laki bus stop, it’s about a 500-meter walk.
Check the photo to make it easier to find your way.
Several buses stop at Laki. If you’re coming from the city center, you can start following the photo directions right away. If you’re arriving from other parts of the city, first cross the road at the pedestrian crossing.
So, you’re at the Laki bus stop…
To the right is Tuuliku Street. A good landmark is the Automaailm car shop; the road runs right along its building. Walk along the pedestrian path beside this street.
The pedestrian path is equipped with benches where you can sit if you’re not in a hurry. In warm weather, it’s green and fresh here, and the path is separated from the road by wide grassy strips.
You need to walk about 200 meters.
Then, turn right onto Värvi Street.
Follow Värvi Street to the historic territory of the former Kommunaar factory. It was once one of Estonia’s largest light industry enterprises. Access was restricted, and you had to pass through a checkpoint. By the way, the garage on the left in the photo is the renovated former Kommunaar factory checkpoint.
Not much further now. Another 200 meters or so, and you’ll reach the parking lot in front of the 4-story building at Tuuliku 4C. Don’t turn anywhere; walk through the parking lot to the building’s entrance. Above the entrance, there’s a sign with the museum’s logo and name.
That’s it, you’re here! Just head up to the fourth floor, following the signs in the building. Enjoy your visit to the museum! 🙂
