NATIONAL DESIGN, INC.
AT600 PLUS
Card Type |
Video card |
Video Chip Set |
S3, Inc. |
Maximum Video Memory |
1MB VRAM |
Video Types Supported |
VGA, XVGA, EGA, CGA, Monochrome |
Highest Resolution Supported |
1280 x 1024 |
Data Bus |
16-bit ISA |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
VGA feature connector |
CN1 |
15-pin analog video port |
CN2 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
Turbo disabled |
SW1/3 |
Off |
Turbo enabled |
SW1/3 |
On | |
» |
Factory configured - do not alter (VRAM) |
JP1 |
Unidentified |
» |
Factory configured - do not alter (engine speed) |
JP2 |
Unidentified |
» |
IRQ9 interrupt disabled |
JP4 |
Off |
IRQ9 interrupt enabled |
JP4 |
On | |
» |
Factory configured - do not alter (monitor ID) |
JP5 |
Unidentified |
WAIT STATE SELECTION | ||
Setting |
JP3 | |
» |
Disabled |
Off |
Enabled |
On | |
Note: SW/3 must be set to the on position to enable zero wait state. |
MONITOR CONFIGURATION SELECTION | ||
Setting |
SW1/1 |
SW1/2 |
VGA,XVGA |
Off |
Off |
Multi-Sync, 38KHz |
Off |
On |
Multi-Sync, 48KHz |
On |
Off |
Multi-Sync, 64KHz |
On |
On |