POWERCOM AMERICA, INC.
9624 EXTERNAL
Card Type |
Fax, Modem (synchronous/asynchronous) |
Chip Set |
Unidentified |
Maximum Data Rate |
2400bps |
Maximum Fax Rate |
9600bps |
Data Bus |
External |
Fax Class |
Class I |
Data Modulation Protocol |
Bell 103/212A ITU-T V.21, V.22, V.22bis, V.23 |
Fax Modulation Protocol |
ITU-T V.21CH2, V.27ter, V.29 |
CONNECTIONS | ||||||
Function |
Label |
Function |
Label | |||
Line in |
CN1 |
DC power |
CN4 | |||
Line out |
CN2 |
Power switch |
SW1 | |||
RS-232/422 |
CN3 |
USER CONFIGURABLE SETTINGS | ||
Function |
Label |
Position |
í SMART mode |
JP1 |
Open |
DUMB mode |
JP1 |
Closed |
MISCELLANEOUS TECHNICAL NOTES |
Note: On U.S. models; V.23, MNP5, V.42, V.42bis is not applicable. |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
HS |
Red |
On |
Modem is operating at 2400bps |
HS |
Red |
Off |
Modem is not operating at 2400bps |
AA |
Red |
On |
Auto-answer enabled |
AA |
Red |
Off |
Auto-answer disabled |
AA |
Red |
Blinking |
Phone is ringing |
CD |
Red |
On |
Carrier signal detected |
CD |
Red |
Off |
Carrier signal not detected |
CD |
Red |
Blinking |
Modem is retraining |
OH |
Red |
On |
Modem is off-hook |
OH |
Red |
Off |
Modem is on-hook |
RD |
Red |
On |
Modem is receiving data |
RD |
Red |
Off |
Modem is not receiving data |
SD |
Red |
On |
Modem is transmitting data |
SD |
Red |
Off |
Modem is not transmitting data |
TR |
Red |
On |
DTR signal is high |
TR |
Red |
Off |
DTR signal is low |
MR |
Red |
On |
Power is on |
MR |
Red |
Off |
Power is off |
MR |
Red |
Blinking |
Modem in self-test mode |
Proprietary AT Command Set
See document V1833 for a full command summary.