TECMAR
WANGTEK 5525ES, WANGTEK 51000HT, WANGTEK 52000HT
Device Type |
Internal Tape Drive |
Interface |
SCSI |
Format |
Quarter Inch |
Sustained Transfer Rate |
Unidentified |
Size |
3.5 in. half height (5.25 in. half height with bezel) |
View |
Bottom |
DRIVE SELECT ID | ||||
Drive ID |
JP1/Pins 1 & 2 |
JP1/Pins 3 & 4 |
JP1/Pins 5 & 6 | |
0 |
Open |
Open |
Open | |
1 |
Closed |
Open |
Open | |
2 |
Open |
Closed |
Open | |
3 |
Closed |
Closed |
Open | |
» |
4 |
Open |
Open |
Closed |
5 |
Closed |
Open |
Closed | |
6 |
Open |
Closed |
Closed | |
7 |
Closed |
Closed |
Closed |
TERMINATION POWER SELECTION | ||
Setting |
E1 | |
» |
TERMPWR supplied by drive |
Closed |
TERMPWR supplied by drive to SCSI interface |
Open |
MANUFACTURERS RECOMMENDED MEDIA | ||
Drive |
Tape |
Capacity Without Compression |
5525ES |
DC6250 |
250 MB |
5525ES |
DC6525 |
525 MB |
51000HT |
DC6250 |
250 MB |
51000HT |
DC6525 |
525 MB |
51000HT |
DC9120 |
1.2 GB |
52000HT |
DC6250 |
250 MB |
52000HT |
DC6525 |
525 MB |
52000HT |
DC9120 |
1.2 GB |
52000HT |
DC9250 |
2.5 GB |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Amber |
Flashing |
Drive activity on the SCSI bus |
LED1 |
Amber |
Pulsing |
Drive fault condition exists |
LED1 |
Amber |
Off |
Drive not active |
Note: "Pulsing" LED1 refers to a flash 1-5 times every 3 seconds. |