D-LINK
DE-220ECAT
NIC Type |
Ethernet |
Network Transfer Rate |
10Mbps |
Data Bus |
16-bit ISA |
Topology |
Linear Bus,Star |
Wiring Type |
Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Boot ROM |
Available (location unidentified |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Unshielded twisted pair port |
CN1 |
AUI transceiver via DB-15 port |
CN3 |
RG-58A/U 50ohm coaxial port |
CN2 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Green |
On |
Power is on |
LED1 |
Green |
Blinking |
Data is being transmitted on 10Base-T |
LED1 |
Green |
Off |
Power is off |
LED2 |
Green |
On |
Network connection is good |
LED2 |
Green |
Blinking |
Data is being received on 10Base-T |
LED2 |
Green |
Off |
Network connection is broken |
LED3 |
Yellow |
On |
Abnormal packets detected on network |
LED3 |
Yellow |
Blinking |
Collision is detected on network |
LED3 |
Yellow |
Off |
Collision is not detected on network |
Note: The locations of LED1, LED2 and LED3 are unidentified. |