BIOSTAR MICROTECH INTERNATIONAL CORPORATION
MB-8500 TUC-A (VER. 1)
Processor |
CX M1/AM K5/Pentium |
Processor Speed |
75/83/90/100/110/120/133/150/166/180/200MHz |
Chip Set |
Unidentified |
Video Chip Set |
None |
Maximum Onboard Memory |
128MB (EDO supported) |
Maximum Video Memory |
None |
Cache |
256/512KB |
BIOS |
AMI |
Dimensions |
290mm x 220mm |
I/O Options |
32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), parallel port, PS/2 mouse port, PS/2 mouse interface, serial ports (2), cache slot, IR connector, USB connector |
NPU Options |
None |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
PS/2 mouse interface |
J1 |
Power LED & keylock |
J13 pins 5 - 9 |
Floppy drive interface |
J2 |
Turbo LED |
J13 pins 10 & 11 |
Serial port 1 |
J5 |
Reset switch |
J13 pins 12 & 13 |
Serial port 2 |
J6 |
Green PC connector |
J13 pins 17 & 18 |
PS/2 mouse port |
J7 |
IDE interface LED |
J13 pins 20 & 21 |
Parallel port |
J9 |
+5v ground |
J13 pins 25 & 26 |
IDE interface 1 |
J10 |
IR connector (optional) |
J14 |
IDE interface 2 |
J11 |
32-bit PCI slots |
PC1 - PC4 |
Chassis fan power |
J12 |
Cache slot |
SL1 |
Speaker |
J13 pins 1 - 4 |
USB connector |
USB |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
Flash BIOS voltage select 12v |
JP10 |
Pins 1 & 2 closed | |
Flash BIOS voltage select 5v |
JP10 |
Pins 2 & 3 closed | |
EPROM or 0v flash BIOS used |
JP10 |
Open | |
» |
CMOS memory normal operation |
JP11 |
Open |
CMOS memory clear |
JP11 |
Closed |
DRAM CONFIGURATION | ||
Size |
Bank 0 |
Bank 1 |
8MB |
(2) 1M x 36 |
None |
16MB |
(2) 2M x 36 |
None |
32MB |
(2) 4M x 36 |
None |
64MB |
(2) 8M x 36 |
None |
16MB |
(2) 1M x 36 |
(2) 1M x 36 |
24MB |
(2) 1M x 36 |
(2) 2M x 36 |
32MB |
(2) 2M x 36 |
(2) 2M x 36 |
40MB |
(2) 1M x 36 |
(2) 4M x 36 |
48MB |
(2) 2M x 36 |
(2) 4M x 36 |
64MB |
(2) 4M x 36 |
(2) 4M x 36 |
72MB |
(2) 1M x 36 |
(2) 8M x 36 |
80MB |
(2) 2M x 36 |
(2) 8M x 36 |
96MB |
(2) 4M x 36 |
(2) 8M x 36 |
128MB |
(2) 8M x 36 |
(2) 8M x 36 |
Note: Board accepts EDO memory. Bank 2 uses DIMM modules. The chip size and configuration is unidentified. |
CACHE CONFIGURATION | ||||
Size |
Bank 0 |
Bank 1 |
TAG |
SL1 |
256KB |
(2) 32K x 32 |
None |
(1) 8K x 8 |
Not installed |
512KB (A) |
(2) 32K x 32 |
(2) 32K x 32 |
(1) 32K x 8 |
Not installed |
512KB (B) |
(2) 32K x 32 |
None |
(1) 8K x 8 |
256KB module installed |
CACHE JUMPER CONFIGURATION | |
Size |
JP5 |
256KB |
Open |
512KB (A) |
Closed |
512KB (B) |
Closed |
CPU SPEED SELECTION (CYRIX) | ||||
CPU speed |
Clock speed |
Multiplier |
JP4 |
JP7 |
100MHz |
50MHz |
2x |
Pins 1 & 2, 3 & 4 closed |
Open |
110MHz |
55MHz |
2x |
Open |
Open |
120MHz |
60MHz |
2x |
Pins 3 & 4 closed |
Open |
133MHz |
66MHz |
2x |
Pins 1 & 2 closed |
Open |
CPU SPEED SELECTION (AMD) | ||||
CPU speed |
Clock speed |
Multiplier |
JP4 |
JP7 |
66MHz |
50MHz |
1x |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
75MHz |
60MHz |
1.5x |
Pins 1 & 2, 3 & 4 closed |
Open |
83MHz |
66MHz |
1.5x |
Open |
Open |
90MHz |
60MHz |
1.5x |
Pins 3 & 4 closed |
Open |
100MHz |
66MHz |
1.5x |
Pins 1 & 2 closed |
Open |
CPU SPEED SELECTION (PENTIUM) | ||||
CPU speed |
Clock speed |
Multiplier |
JP4 |
JP7 |
75MHz |
50MHz |
1.5x |
Pins 1 & 2, 3 & 4 closed |
Open |
90MHz |
60MHz |
1.5x |
Pins 3 & 4 closed |
Open |
100MHz |
66MHz |
1.5x |
Pins 1 & 2 closed |
Open |
120MHz |
60MHz |
2x |
Pins 3 & 4 closed |
Pins 1 & 2 closed |
133MHz |
66MHz |
2x |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
150MHz |
60MHz |
2.5x |
Pins 3 & 4 closed |
Pins 1 & 2, 3 & 4 closed |
166MHz |
66MHz |
2.5x |
Pins 1 & 2 closed |
Pins 1 & 2, 3 & 4 closed |
180MHz |
60MHz |
3x |
Pins 3 & 4 closed |
Pins 3 & 4 closed |
200MHz |
66MHz |
3x |
Pins 1 & 2 closed |
Pins 3 & 4 closed |
CPU TYPE SELECTION | |||
Type |
JP6 |
JP9 |
JP15 |
Cyrix |
1 & 2, 4 & 5 |
2 & 3, 4 & 5, 7 & 8, 9 & 10 |
Open |
AMD |
1 & 2, 4 & 5 |
2 & 3, 4 & 5, 7 & 8, 9 & 10 |
Open |
Intel P54C/CQS/CT |
1 & 2, 4 & 5 |
2 & 3, 4 & 5, 7 & 8, 9 & 10 |
Open |
Intel P55C/CT |
2 & 3, 5 & 6 |
1 & 2, 3 & 4, 6 & 7, 8 & 9 |
Closed |
Note: Pins designated should be in the closed position. |
CPU VOLTAGE SELECTION | |
Voltage |
JP14 |
3.4v |
Closed |
3.5 |
Open |