Card Type	Serial/Parallel Adapter
I/O Options	Parallel port, serial ports (2)
Data Bus	8-bit ISA

CONNECTIONS
Function	Label	Function	Label
26-pin serial port	J1	25-pin parallel port	J3
9-pin serial port	J2
Note: For J1, one 26 pin-to-25 pin female D connector adapter cable is needed to provide a standard RS-232 connection point

USER CONFIGURABLE SETTINGS
Function		Label	Position
	COM1 enabled	SW1/1	On
	COM1 disabled	SW1/1	Off
	PRT1 enabled	SW1/2	On
	PRT2 disabled	SW1/2	Off
	COM2 enabled	SW1/3	On
	COM2 disabled	SW1/3	Off
»	Factory configured - do not alter	SW1/4	Unidentified

PARALLEL PORT ADDRESS SELECTION
Setting	JP1
LPT1 (378h)	Pins 1 & 2, 5 & 6 closed
LPT2 (278h)	Pins 1 & 2, 4 & 5 closed