S T 4 3 5 0 N W R E N SEAGATE NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 5.25"/FH Cylinders 1412| | | Capacity form/unform 300/ 350 MB Heads 9| | | Seek time / track 17.0/ ms Sector/track 46| | | Controller SCSI1 SINGLE-ENDED Precompensation Cache/Buffer 32 KB Landing Zone Data transfer rate MB/S int Bytes/Sector 512 1.500 MB/S ext Recording method RLL 2/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C | Power: sleep W Humidity % | standby W Altitude km | idle W Shock g | seek 27.0 W Rotation RPM 3600 read/write W Acoustic dBA spin-up W ECC Bit MTBF h 100000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** J U M P E R S ********************************************************************** SEAGATE ST4350N/ST4376N JUMPER SETTING Jumper Setting ============== Connects CHASIS ground to ground lug ------------+ Connects SIGNAL ground to ground lug ----------+ | Drive Select ID's -----+ | | Motor Start Option enable -+ | G G Parity Check Option enable+ | +-+-+ +1+2+ +P M 4 2 1+|o|o| POWER |o o o o o||o|o| +---------+ |o o o o o|+-+-+ | O O O O | ------------------------------------+---------+--------+---------PWA- -+------+---+-------------------------+--------+--------+--Data-PWA-- 1------+ |XXXXXXXXXXXXXXXXXXXXXXXXX| +-+ 1--------+ Terminator +------------------------1+ |o| o Terminator INTERFACE |o+-o +++ TERMPWR (+5v) from drive (vertical) -----+ TERMPWR from the Bus (lower horizontal)