Q M 3 0 5 4 0 F B S F I R E B A L L QUANTUM Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders 3835| | | Capacity form/unform 545/ MB Heads 2| | | Seek time / track 12.0/ 3.0 ms Sector/track | | | Controller SCSI3 SI/FA Precompensation Cache/Buffer 128 KB Landing Zone Data transfer rate 10.000 MB/S int Bytes/Sector 512 10.000 MB/S ext SYNC Recording method PRML 16/17 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 55 | -40 75 Power: sleep 0.8 W Humidity % 5 85 | 5 95 standby 0.8 W Altitude km -0.226 3.048| -0.226 12.192 idle 3.5 W Shock g 10 | 70 seek 6.0 W Rotation RPM 5400 read/write 5.0 W Acoustic dBA 32 spin-up W ECC Bit 48,ON THE FLY MTBF h 500000 Warranty Month 36 Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** QUANTUM SCSI DRIVES JUMPER SETTING +---------------------------------------------------------+ | +--A1-+ ++ |XX | +-----+ || |XXI | || |XXT | Terminator || |XXE | ++ |XXR | ++ |XXF | +-+ || |XXA | | A2 || |XXC | +-+ Terminator || |XXE | ++ |XX | |XX | | ++ - |XX Power ++LED+ |XX +---------------------------------------------------------+ RE = For factory use only (RESERVED) Jumper A1 --------- +--+--+--+--+--+ |PK|TE|A0|A1|A2| Drives: Trailblazer 420/850 +--+--+--+--+--+ Fireball 540/1080 Jumper A1 --------- +--+--+--+ |A0|A1|A2| Drives: LPS 127/170/340 +--+--+--+ Maverick 270/540 Jumper A1 --------- +--+--+--JP1 |A0|A1|A2| Drives: ELS 42/85/127/170 +--+--+--+ Jumper A1 --------- +--+--+--+ +--+--+--+ |RE|RE|P0| |A0|A1|A2| Drives: LPS 270/540 +--+--+--+ +--+--+--+ Ligthning 365/540/730 Jumper A1 --------- +--+--+--+ +--+--+--+ |SS|EP|WS| |A2|A1|A0| Drives: 40/80/120/170/210 +--+--+--+ +--+--+--+ LPS 52/80/105 Jumper A1 --------- +--+--+--+ +--+--+--+ |SS|EP|WS| |A0|A1|A2| Drives: LPS 120/240 +--+--+--+ +--+--+--+ Jumper A2 --------- +--+ | | |A2| Drives: LPS 270/540 |A1| Ligthning 365/730 |A0| Fireball 540/1080 |RE| +--+ ********************************************************************** J U M P E R S ********************************************************************** QUANTUM SCSI DRIVES JUMPER SETTING Jumper Setting ============== J2 SCSI ID ----------- +----------+-----------------------+ | SCSI ID | Jumpers | | | A2 | A1 | A0 | +----------+-------+-------+-------+ | 0 | OPEN | OPEN | OPEN | | 1 | OPEN | OPEN | CLOSED| | 2 | OPEN | CLOSED| OPEN | | 3 | OPEN | CLOSED| CLOSED| | 4 | CLOSED| OPEN | OPEN | | 5 | CLOSED| OPEN | CLOSED| | 6 | CLOSED| CLOSED| OPEN | Factory default | 7 | CLOSED| CLOSED| CLOSED| +----------+-------+-------+-------+ A2 (MSB), A1, or A0 determine the drive's binary SCSI address ID. +--------------------+------+-------+-------------------------------- |Quantum Drive Type |Jumper|Setting|Description +--------------------+------+-------+-------------------------------- |ProDrive 40/80/120/ | SS |OFF |Self Seek Test disabled |170/210 | |ON |Self Seek Test enabled: For |LPS 52/80/105 | | |factory use ONLY! The test is | | | |indicated when power is applied | | | |to the drive. The test will | | | |continue until power is removed. | | | |On most drives, the LED remains | | | |on during the test (a flashing | | | |LED indicates a drive error). +--------------------+------+-------+-------------------------------- |ProDrive 40/80/120/ | EP |OFF |Parity Check disabled. |170/210 | |ON |Parity checking enabled: The |LPS 52/105/120/240 | | |drive generates parity | | | |information and performs parity | | | |checking of data across the SCSI | | | |bus. +--------------------+------+-------+-------------------------------- |ProDrive 120/170/210| WS |OFF |WaitSpin disabled. Drive motor |LPS52/80/105/120/240| | |power is applied when system | | | |power is applied to the | | | |computer. | | |ON |WaitSpin enabled. Drive motor | | | |power is applied when the host | | | |sends a START/STOP UNIT command. | | | |This option permits unit power | | | |sequencing so that the | | | |computer's power supply in a | | | |multidevice system is not over- | | | |loaded. +--------------------+------+-------+-------------------------------- |ProDrive LPS 270/540| PO |OFF |Parity checking disabled. |Ligthning365/540/730| |ON |Parity checking enabled: The |LPS 52/105/120/240 | | |drive generates parity | | | |information and performs parity | | | |checking of data across the SCSI | | | |bus. +--------------------+------+-------+-------------------------------- |Trailblazer 420/850 | TE | OFF |Termination disabled. |Fireball 540/1080 | | ON |Termination enabled. When the | | | |jumper is installed, it connects | | | |the termination resistors to the | | | |SCSI bus. Jumper TE should be | | | |ON when the drive is the last | | | |physical device on the SCSI bus. +--------------------+------+-------+-------------------------------- |Fireball 540/1080 | PK | |Terminals to PARKING jumper are |Trailblazer 420/850 | | |not used. The terminals are not | | | |connected. +--------------------+------+-------+-------------------------------- ********************************************************************** F E A T U R E S ********************************************************************** QUANTUM TRAILBLAZER/FIREBALL Plug-and-Play firmware (AT Bus Cable Select for Fast ATA drives and Plug-and-Play SCSI for Fast SCSI drives) simplifies disk drive installation by automatically configuring Trailblazer drives and eliminating the need for any manual jumper settings.