K C 4 0 G A KYOCERA NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders 1069| 977| | Capacity form/unform 41/ MB Heads 2| 5| | Seek time / track 28.5/ 9.5 ms Sector/track 38| 17| | Controller IDE / AT Precompensation Cache/Buffer 32 KB Landing Zone Data transfer rate 1.250 MB/S int Bytes/Sector 512 4.000 MB/S ext Recording method RLL 2/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 60 | -40 60 Power: sleep W Humidity % 8 80 | 8 80 standby 3.4 W Altitude km -0.305 3.048| -0.305 12.192 idle 6.8 W Shock g 10 | 50 seek 8.7 W Rotation RPM 2747 read/write W Acoustic dBA 40 spin-up W ECC Bit 56 MTBF h 40000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** KYOCERA KC-40GA/80GA PRODUCT DESCRIPTION +---------------------------------------------------------+ | |XX | +--+J3 |XX I | +-+RESERVED +--+ +-+J1 |XX N | +-+ +-+ |XX T | 1+--+ |XX E | | |J2 |XX R | | | |XX F | +--+ |XX A | |XX C | +-+ External |XX E | | | LED |XX | +-+ |XX | | | |XX Power | |XX +---------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** KYOCERA KC-40GA/80GA PRODUCT DESCRIPTION Jumper setting -------------- J1 LED ------- J1 can be shorted on the drive to control a common LED in a two drive installation. Only the jumper on the drive with the LED should be CLOSED. J2 & J3 Drive Select Jumpers ----------------------------- +---------------------------------------+---------------+--------+ |Drive Select | J2/jumper 1 | J3 | +---------------------------------------+---------------+--------+ |Only drive in the system | OPEN | CLOSED| +---------------------------------------+---------------+--------+ |Master drive in two drive system | CLOSED | OPEN | +---------------------------------------+---------------+--------+ |Slave drive in two drive system | OPEN | OPEN | +---------------------------------------+---------------+--------+ J2 User Configurable Jumpers ------------------------------- +-----------------------------------+--------------+--------+ | Function | Jumper |Position| +-----------------------------------+--------------+--------+ |Auto park enabled | J2/jumper 6 | OPEN | +-----------------------------------+--------------+--------+ |Auto park disabled | J2/jumper 6 | CLOSED | +-----------------------------------+--------------+--------+ |For use with common BIOS | J2/jumper 2 | OPEN | +-----------------------------------+--------------+--------+ |For use with Compaq BIOS | J2/jumper 2 | CLOSED | +-----------------------------------+--------------+--------+ J2/jumper 3-5 are test jumper and should be set "open". ********************************************************************** I N S T A L L ********************************************************************** KYOCERA KC-40GA PRODUCT DESCRIPTION Acoustic Noise -------------- Idle Mode 40 dBA max. (at 1 meter) R/W Seek Mode 45 dBA max. (at 1 meter) Mounting Screws --------------- M4 x 0.7 x 4 (Dep.) or UNC #6-32 x 0.15" ********************************************************************** F E A T U R E S ********************************************************************** KYOCERA KC-40GA PRODUCT DESCRIPTION Key Features: Single Media for 40M Bytes The high recording density is accomplished by a combination of MIG Head and thin film media. Employs "zone bit density" for the most effective use utility of the media. 32KB Buffer (32K Bytes Cache Memory) Makes the through-put faster and the high capacity buffer makes the execution of the zero latency time function. Connected to IBM PC-AT and Equivalent Interface Option of Host Adapter Board for connection to PC-AT and equivalent interface is available. High Speed Stepping Motor with 0.225 step and Speed Sensor Coils The employment of 0.225 Step Angle reduces the rotation angle of stepping motor. Servo Controlled Head Positioning by Useful Micro Stepper Motor The more precise positioningg is performed by Kyocera's advanced servo control technology and micro step control technology. Functions of Power Down and Parking In case Read/Write/Seek command are not executed for the specified time, the drive will go to "Save-Enegy-Mode" after moving the heads to the park zone. Diagnostic Function In addition to the high performance and reliability design, Diagnostic function is also employed for more convenient incoming inspection at OEM and evaluations by VAR/Distributor etc. High Reliability Offer MTBF 40,000 hours. For higher reliability of "Data" it hold 56- bit ECC function. MTTR 20 minutes typical Preventive Maintenance None Component Design Life 5 years Seek Times ---------- +----------------------------------+--------+ | Track to track msec. | 9.5 | +----------------------------------+--------+ | Average msec. typ. | 28.5 | | Average msec. max. | 55 | +----------------------------------+--------+ |Latency msec. avg. | 10.92 | +----------------------------------+--------+