Data bus:	16-bit ISA
Size:	Half length, half-height card
Hard drive supported:	Two IDE(AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function	Location
34-pin data cable connector - floppy drive	J1
40-pin control cable connector - hard drive	J2
15-pin game port - internal	J3
9-pin serial port 1 - internal	J4
9-pin serial port 2 - internal	J6
25-pin parallel port - external	J7
4-pin connector - drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Parallel port unidirectional select	JP3	closed
	Parallel port bi-directional select	JP3	open
»	IDE interface address 3F6, 3F7, 1F0 - 1F7h	JP4/A	pins 1 & 2 closed
	IDE interface address 376, 377, 170 - 177h	JP4/A	pins 2 & 3 closed
»	IDE interface enabled	JP4/B	pins 2 & 3 closed
	IDE interface disabled	JP4/B	pins 1 & 2 closed

USER CONFIGURABLE SETTINGS(CONTINUED)
Function		Location	Setting
»	Floppy drive interface address 3F0 - 3F7h select	JP4/C	pins 1 & 2 closed
	Floppy drive interface address 370 - 377h select	JP4/C	pins 2 & 3 closed
»	Floppy drive interface enabled	JP4/D	pins 2 & 3 closed
	Floppy drive interface disabled	JP4/D	pins 1 & 2 closed

SERIAL PORT CONFIGURATION
Port 1 (J4)		Port 2 (J6)	JP2/A	JP2/B	JP2/C	JP2/D
»	COM1	COM2	pins 2 & 3	pins 1 & 2	pins 2 & 3	pins 1 & 2
	COM1	COM3	pins 2 & 3	pins 1 & 2	pins 2 & 3	pins 2 & 3
	COM1	COM4	pins 2 & 3	pins 1 & 2	pins 1 & 2	pins 2 & 3
	COM3	COM2	pins 1 & 2	pins 2 & 3	pins 2 & 3	pins 1 & 2
	COM3	COM4	pins 1 & 2	pins 2 & 3	pins 1 & 2	pins 2 & 3
	COM4	COM2	pins 2 & 3	pins 2 & 3	pins 2 & 3	pins 1 & 2
	COM4	COM3	pins 2 & 3	pins 2 & 3	pins 2 & 3	pins 2 & 3
	Disabled	COM2	pins 1 & 2	pins 1 & 2	pins 2 & 3	pins 1 & 2
	Disabled	COM3	pins 1 & 2	pins 1 & 2	pins 2 & 3	pins 2 & 3
	Disabled	COM4	pins 1 & 2	pins 1 & 2	pins 1 & 2	pins 2 & 3
	Disabled	Disabled	pins 1 & 2	pins 1 & 2	pins 1 & 2	pins 1 & 2
	COM1	Disabled	pins 2 & 3	pins 1 & 2	pins 1 & 2	pins 1 & 2
	COM3	Disabled	pins 1 & 2	pins 2 & 3	pins 1 & 2	pins 1 & 2
	COM4	Disabled	pins 2 & 3	pins 2 & 3	pins 1 & 2	pins 1 & 2
Note: All pins designated should be placed in the closed position.

SERIAL PORT INTERRUPT SELECT
Port 1 (J4)		J5/A	J5/B	J5/C	Port 2 (J6)	J5/D	J5/E	J5/F
»	IRQ4	closed	open	open	IRQ3	closed	open	open
	IRQ3	open	closed	open	IRQ4	open	closed	open
	IRQ5	open	open	closed	IRQ5	open	open	closed

PARALLEL PORT CONFIGURATION
LPT		JP2/E	JP2/F
»	3	pins 2 & 3 closed	pins 2 & 3 closed
	1	pins 1 & 2 closed	pins 2 & 3 closed
	2	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed

PARALLEL PORT INTERRUPT SELECT
IRQ		J5/G	J5/H
»	IRQ7	closed	open
	IRQ5	open	closed