STB SYSTEMS, INC.
GRAPHIX PLUS II
Card Type |
Multi-I/O |
Video Processor |
6845 |
Maximum Onboard Memory |
32KB DRAM |
I/O Options |
SASI/SCSI connector, clock/calendar, light pen port, parallel port, video port (3), RF modulator connector |
Data Bus |
8-bit ISA |
Video Types Supported |
Monochrome/CGA |
Highest Resolution Supported |
640 x 350 |
Hard Drives Supported |
Up to 7 SASI or SCSI devices |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Parallel or SASI/SCSI port |
J1 |
Light pen port |
J5 |
Test connector |
J2 |
CGA video out |
J6 |
1.5V AA battery connector |
J3 |
Composite video out |
J7 |
RF modulator connector |
J4 |
Monochrome video out |
J8 |
USER CONFIGURABLE SETTINGS | |||
Setting |
Label |
Position | |
» |
J1 is a parallel port |
SW1/1 |
Off |
J1 is a SASI/SCSI port |
SW1/1 |
On | |
» |
Automatically detect the adapter type being used by software |
SW1/4 |
On |
Send all video signals to the monochrome monitor |
SW1/4 |
Off | |
» |
Monochrome video disabled when monochrome monitor is off or not connected |
SW1/5 |
On |
Monochrome video enabled even when no monitor is available |
SW1/5 |
Off | |
» |
Red signal sent to monochrome display |
SW1/6 |
On |
Red not signal sent to monochrome display |
SW1/6 |
Off | |
» |
Green signal sent to monochrome display |
SW1/7 |
On |
Green not signal sent to monochrome display |
SW1/7 |
Off | |
» |
Blue signal sent to monochrome display |
SW1/8 |
On |
Blue not signal sent to monochrome display |
SW1/8 |
Off |
MONITOR TYPE SELECTION | |||
Setting |
SW1/2 |
SW1/3 | |
» |
Card acts as both monochrome and color displays |
Off |
Off |
Card acts as monochrome display only |
Off |
On | |
Card acts as color display only |
On |
Off | |
Card behaves like Graphix Plus card in monochrome graphics mode |
On |
On |