TRANTOR SYSTEMS, LTD.
T130
|
Data bus: |
8-bit, ISA |
Size: |
Half-length, full-height card |
Hard drive supported: |
Up to seven SCSI devices |
Floppy drives supported: |
None |
CONNECTIONS | |
Function |
Location |
DB25 SCSI connector - external |
J1 |
50-pin SCSI connector - internal |
J2 |
4-pin connector - Drive Activity LED |
J4 |
I/O PORT ADDRESS | ||
Address |
SW1/switch 1 |
SW1/switch 2 |
350h |
off |
off |
340h |
off |
on |
250h |
on |
off |
240h |
on |
on |
BIOS ADDRESS - SW1 | |||
Address |
SW1/switch 3 |
SW1/switch 4 |
SW1/switch 5 |
Disabled |
off |
off |
off |
CA00h |
off |
off |
on |
CE00h |
off |
on |
off |
DA00h |
off |
on |
on |
DE00h |
on |
off |
off |
Reserved |
on |
off |
on |
Reserved |
on |
on |
off |
Reserved |
on |
on |
on |
INTERRUPT REQUEST | ||||
IRQ |
JP3/jumper 1 |
JP3/jumper 2 |
JP3/jumper 3 | |
» |
Disabled |
open |
open |
open |
IRQ3 |
closed |
open |
open | |
IRQ5 |
open |
cosed |
open | |
IRQ7 |
open |
open |
closed |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
» |
BIOS enabled |
SW1/switch 6 |
off |
BIOS disabled |
SW1/switch 6 |
on | |
» |
Factory configured - do not alter |
SW1/switch 7 |
off |
» |
Factory configured - do not alter |
SW1/switch 8 |
off |
» |
Zero Wait State disabled |
JP2 |
open |
Zero Wait State enabled |
JP2 |
closed |