MAXTOR CORPORATION

AT ADAPTER BOARD

Data bus: 16-bit, ISA

Size: Half-length, full height card

Hard drives supported: Two IDE (AT) Interface drives

Floppy drives supported: None

CONNECTIONS

Function

Location

40-pin AT Interface (IDE) connector-internal

CN1

2-pin connector-drive active LED

CN2

USER CONFIGURABLE SETTINGS

Function

Location

Setting

»

Hard drive port address is 1F0-1F7h

JP1/Jumper 1

open

 

Hard drive port address is 170-177h

JP1/Jumper 1

closed

»

I/O Channel Ready enabled

JP1/Jumper 2

closed

 

I/O Channel Ready disabled

JP1/Jumper 2

open

»

Factory configured - do not alter

JP1/Jumper 3

open

»

Factory configured - do not alter

JP1/Jumper 4

closed

»

Factory configured - do not alter

JP1/Jumper 5

open

»

Drive active LED enabled

JP1/Jumper 6

closed

 

Drive active LED disabled

JP1/Jumper 6

open