EASTERN ELECTRONICS COMPANY
IDC-747
|
|
Data bus: 16-bit, ISA
Size: Full-length, full-height card
Hard drives supported: Four IDE (AT) Interface drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin data cable connector-floppy drives |
CN1 |
|
40-pin IDE (AT) Interface connector-drives 1 & 2 |
CN2 |
|
40-pin IDE (AT) Interface connector-drives 3 & 4 |
CN3 |
|
4-pin connector-drive active LED |
CN4 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Normal I/O decoder speed |
JP1 |
pins 1 & 2 closed |
|
Fast I/O decoder speed |
JP1 |
pins 2 & 3 closed | |
| » |
Hard drive port address is 1F0-1F7h, 3F6-3F7h |
JP3/jumper 4 |
closed |
|
Hard drive port address is 170-177h, 376-377h |
JP3/jumper 4 |
open | |
| » |
Floppy drive enabled |
JP3/jumper 5 |
closed |
|
Floppy drive disabled |
JP3/jumper 5 |
open | |
| » |
Factory configured - do not alter |
JP3/jumper 6 |
closed |
| » |
Factory configured - do not alter |
JP3/jumper 7 |
N/A |
|
BIOS ADDRESS | ||||
|
Address |
JP3/jumper 1 |
JP3/jumper 2 |
JP3/jumper 3 | |
| » |
D800h |
open |
closed |
closed |
|
D000h |
open |
open |
closed | |
|
C800h |
open |
closed |
open | |
|
Disabled |
open |
open |
open | |
|
INTERRUPT REQUEST | |||||
|
IRQ |
JP2/jumper 1 |
JP2/jumper 2 |
JP2/jumper 3 |
JP2/jumper 4 | |
|
IRQ5 |
closed |
open |
open |
open | |
|
IRQ12 |
open |
closed |
open |
open | |
| » |
IRQ14 |
open |
open |
closed |
open |
|
IRQ15 |
open |
open |
open |
closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
This card's cache feature supports 256KB, 1MB, or 4MB SIMM's; making the maximum cache capacity 16MB. The same size SIMM must be installed in each socket of a bank and Bank 0 must be filled for proper operation of the controller. |