ARCHIVE CORPORATION
40MB INTERFACE CARD
Card Type |
Tape Drive/Floppy Drive adapter card |
Tape/Floppy drives supported |
Unidentified |
Data Bus |
8-bit ISA |
Card Size |
Three-quarter length, half-height card |
CONNECTIONS | |||
Function |
Location |
Function |
Location |
Fuse (1.0 Amp; +5 Volt DC) |
F1 |
External Tape interface connector |
J5 |
Fuse (2.0 Amp; +12 Volt DC) |
F2 |
Internal Tape interface connector |
J6 |
DC Power connector |
J2 |
XT Floppy interface connector |
J7 |
AT Floppy interface connector |
J3 |
Resistor network |
RN1 |
Controller interface connector |
J4 |
BASE I/O ADDRESS SELECTION | ||
Setting |
JP1 | |
» |
3F2h |
Pins 2 & 3 closed |
370h |
Pins 1 & 2 closed |
MISCELLANEOUS TECHNICAL NOTES |
Adapter intended to be used with Archive Corporation tape drives (internal model 5540 and external model 3540C). |