Data bus:	32-bit, EISA
Size:	Half-length, full-height card
Hard drive supported:	Up to seven SCSI devices
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
4-pin connector - drive active LED	J1
34-pin control cable connector - floppy drive (optional)	J2
50-pin SCSI Channel A connector - internal	J3
50-pin SCSI Channel B connector - internal (optional)	J5
50-pin SCSI Channel A connector - external	J6

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	J4	closed
	Floppy drive disabled	J4	open
Note: Jumper J4 is only present on those boards with a floppy drive.