TECMAR

WANGTEK 5150ES (33678-XXX VER.2)

Device Type

Internal Tape Drive

Interface

SCSI

Format

QIC-120, QIC-150 (write)

QIC-24, QIC-120, QIC-150 (read)

Sustained Transfer Rate

1800KBPS

Size

5.25 in. half height

View

Bottom

CONNECTIONS

Function

Label

Ground connector

CN1

USER CONFIGURABLE SETTINGS

Setting

Label

Position

»

Ground connector enabled

E2

Closed

 

Ground connector disabled

E2

Open

»

Factory configured - do not alter

E5

Closed

»

Factory configured - do not alter

E20/0

Open

»

Factory configured - do not alter

E20/1

Open

»

Factory configured - do not alter

E20/2

Open

»

Factory configured - do not alter (Diagnostic test connector)

J32

Open

DRIVE SELECT ID

Drive ID

J10/A

J10/B

J10/C

0

Open

Open

Open

1

Closed

Open

Open

2

Open

Closed

Open

3

Closed

Closed

Open

4

Open

Open

Closed

5

Closed

Open

Closed

6

Open

Closed

Closed

7

Closed

Closed

Closed

Note: The function of jumper J10/D is unidentified. It is factory configured and should not be altered.

TERMINATION POWER SELECTION

Setting

E1

»

TERMPWR supplied by drive

Closed

 

TERMPWR supplied by SCSI interface to drive

Open

MANUFACTURERS RECOMMENDED MEDIA

Tape

Capacity

DC 600A

125 MB (in QIC-120 mode)

DC 6150

150 MB (in QIC-150 mode)

DC 6250

250 MB (in QIC-150 mode)

DIAGNOSTIC LED(S)

Note: Function and location of LED(s) is/are unidentified.

MISCELLANEOUS TECHNICAL NOTES

Termination is enabled or disabled via the three terminating resistors (see diagram).