TEKRAM TECHNOLOGY CO., LTD.

DC-690B

Data bus:

32-bit, PCI

Size:

Three/quarter-length, full-height card

Hard drive supported:

Four IDE (AT) Interface drives

Floppy drives supported:

None

CONNECTIONS

Function

Location

40-pin IDE (AT) Interface connector - IDE-0

CN1

40-pin IDE (AT) Interface connector - IDE-1

CN2

14-pin PCI legacy-header connector

CN3

10-pin cable connector to JP4

CN4

2-pin connector - drive active LED

JP1

4-pin connector - cache error speaker

JP2

10-pin cable connector to CN4

JP4

PCI INTERRUPT SELECTION

INT

JP3/jumper 1

JP3/jumper 2

JP3/jumper 3

JP3/jumper 4

»

INTA

closed

open

open

open

 

INTB

open

closed

open

open

 

INTC

open

open

closed

open

 

INTD

open

open

open

closed

USER CONFIGURABLE SETTINGS

Function

Location

Setting

»

Hard drive port address 1F0h and IRQ14 enabled

JP3/jumper 5

closed

 

Hard drive port address 170h and IRQ15 enabled

JP3/jumper 5

open

DRIVE ACTIVE LED ERROR CODES (IMMEDIATELY AFTER POWER-UP)

Status

Function

One short flash

No cache DRAM installed

Two short flashes

CPU error

Three short flashes

SRAM error

Four short flashes

Timer error

MISCELLANEOUS TECHNICAL NOTES

Some versions of this board have two 512KB x 8 DRAM chips mounted in place of Bank 0. In such a case the board will work without additional memory. In all other cases a pair of 256KB, 1MB, or 4MB SIMM modules must be installed in Bank 0 for the board to function.

The optional ISA/EISA paddleboard solves the DC-690B incompatibility problem with some early PCI mainboards. If installed, connect CN3 to JP4, and set JP4/jumpers 1-4 in the open position.