BUSLOGIC, INC.

BT-910A

Data bus:

32-bit, PCI-bus

Size:

Full-length, full-height card

Hard drive supported:

Up to four IDE(AT) interface devices

Floppy drives supported:

None

CONNECTIONS

Function

Location

40-pin connector - IDE(AT) interface 1

CN1

40-pin connector - IDE(AT) interface 2

CN2

4-pin connector - Drive activity LED

JP1

4-pin connector - Speaker

JP2

USER CONFIGURABLE SETTINGS

Function

Location

Setting

»

Hard drive filtering for primary I/O address disabled

JDR0

open

 

Hard drive filtering for primary I/O address enabled

JDR0

closed

»

Hard drive filtering for secondary I/O address disabled

JDR1

open

 

Hard drive filtering for secondary I/O address enabled

JDR1

closed

IDE IRQ CHANNEL CONFIGURATION

Interrupt

J3/jumper 1

J3/jumper 2

J3/jumper 3

J3/jumper 4

»

INT A#

closed

open

open

open

 

INT B#

open

closed

open

open

 

INT C#

open

open

closed

open

 

INT D#

open

open

open

closed

Note: The jumper settings for Jumpers 1-4 should match the INT selection in the AutoIDE’s Controller Option Select module.

I/O PORT CONFIGURATION - J3

I/O Port

IDE IRQ Channel

Port Address

J3/jumper 5

»

Primary

14

1F0-1F7

closed

 

Secondary

15

170-177

open

Note: The jumper setting for Jumper 5 should match the value for the Controller I/O Port option in the AutoIDE’s Controller Option Select module.

DRAM CONFIGURATION

Size

Bank 0

Bank 1

512KB

(2) 256K x 9

NONE

1MB

(2) 256K x 9

(2) 256K x 9

2MB

(2) 1M x 9

NONE

2.5MB

(2) 1M x 9

(2) 256K x 9

2.5MB

(2) 256K x 9

(2) 1M x 9

4MB

(2) 1M x 9

(2) 1M x 9

8MB

(2) 4M x 9

NONE

8.5MB

(2) 4M x 9

(2) 256K x 9

8.5MB

(2) 256K x 9

(2) 4M x 9

10MB

(2) 4M x 9

(2) 1M x 9

10MB

(2) 1M x 9

(2) 4M x 9

16MB

(2) 4M x 9

(2) 4M x 9